Products

Video Over POF
»» Luceat

Bulkhead-Couplers
»» Avago
»» MOST
»» MPO
»» SCRJ
»» SC
»» SMA
»» SMI
»» ST
»» Toslink

Connectors
»» Avago
»» SMI
»» ST®
»» SMA
»» Hybrid Connectors
»» TOSLink / PNF07 
»» MOST
»» Light-Seal®
»» Custom Made
»» Harsh Enviorment
»» MTP
»» SC
»» SCRJ


Giga POF Connectors
»»» Simplex Connector
»»» Duplex Connectors

Components
»» Crimp Ring
»» Dust Caps
»» Other POF Components
»» Strain Reliefs

POF Related Products
»» Convertes and repeaters
»» Ethernet POF Networks
»» Wallplates
»» TOSlink Related Items
»» Low Cost POF Tools
 »» Visible Light Source

Fiber Optic Hand Tools
»» Stripping
»» Crimping
»» Cutting


FiberFin Finishing Tools
»» STD 1 POF Tool
»» STD 2 POF Tool
»» Avago POF Tool
»» SMI Tool
»» TOSLink /F05 Tool
»» MOST Crimp Tool
»» MOST Finishing Tool
»» Replacement Cuting Head

FiberFin Installers Kits
»» FiberFin Basic Installers Kit
»» TOSLink / F05 Installers Kit
»» Avago Installers Kit
»» FiberFin SMI Installers Kit
»» MOST Installers Kit
»» FiberFin 4 (Installers Kit)
»» GigaPOF Installers Kit

FiberFin Finishing Equipment
»» FiberFin 4 (Machine)
»» Faceplates
»» FiberFin 140
»» FiberFin Automation
»» FiberFin HotPlate


Light-Seal® Tools
»» Light-Seal® Swage HAND TOOL 2.2mm
»» Light-Seal® Swage HAND TOOL ST
»» Light-Seal® Swage HAND TOOL SMA


Fiber Optic Test Kit
»» Adapters, Test kit, POF Connectors

 
    Specs:
  • Terminates / Finishes 2.2mm POF cable
  • Average Attenuation loss 1.0 –1.5 db
  •  Strips the Jacket to the proper length
  • Very consistent results
  • Guaranteed even wear of the cutting blade
  • Safe cutting system with 1270 terminations per head
  • Very user friendly
How it works:

This basic tool kit was tailored made for the installer so that they have one tool that can do all the jobs of installation and have all the needed supplies at the job site in one handy carrying case. The FiberFin "all in one" hand tool can terminate the fiber; strip the jacket to the proper length with consistent results every time, which is a must for the professional installer. The termination is done by clamping the POF cable into place and then squeezing it and then a very precise round razor blade can cut the cable with a scissor like action without damaging the fiber. Damage to the fiber is a very common occurrence when you try to just cut POF with a normal razor blade, The exit cut will chip the fiber and cladding and the cut will not be as precise and perpendicular as with the FiberFin termination system that has a average attenuation loss 1.0 –1.5 db.  The special blade on the FiberFin "all In One Tool" is mounted on a gear assembly that rotates the blade every time you cut a fiber so that you get even wear on the cutting blade and very constant fiber termination results. After 1270 cuts the cutting assembly will stop and prevent the usage of the unit, at this time you are able to put on the replacement cutting head. The FiberFin's cutting system is a safe way to handle termination of POF as the cutting system is enclosed and user friendly.

 
Web Design Copyright: Web Design Dr.

Copyright (c) 2006. FiberFin Inc.
All rights reserved.