Products

Video Over POF
»» Luceat

Bulkhead-Couplers
»» Avago
»» MOST
»» MPO
»» SCRJ
»» SC
»» SMA
»» SMI
»» ST
»» Toslink

Connectors
»» Avago
»» SMI
»» ST®
»» SMA
»» Hybrid Connectors
»» TOSLink / PNF07 
»» MOST
»» Light-Seal®
»» Custom Made
»» Harsh Enviorment
»» MTP
»» SC
»» SCRJ


Giga POF Connectors
»»» Simplex Connector
»»» Duplex Connectors

Components
»» Crimp Ring
»» Dust Caps
»» Other POF Components
»» Strain Reliefs

POF Related Products
»» Convertes and repeaters
»» Ethernet POF Networks
»» Wallplates
»» TOSlink Related Items
»» Low Cost POF Tools
 »» Visible Light Source

Fiber Optic Hand Tools
»» Stripping
»» Crimping
»» Cutting


FiberFin Finishing Tools
»» STD 1 POF Tool
»» STD 2 POF Tool
»» Avago POF Tool
»» SMI Tool
»» TOSLink /F05 Tool
»» MOST Crimp Tool
»» MOST Finishing Tool
»» Replacement Cuting Head

FiberFin Installers Kits
»» FiberFin Basic Installers Kit
»» TOSLink / F05 Installers Kit
»» Avago Installers Kit
»» FiberFin SMI Installers Kit
»» MOST Installers Kit
»» FiberFin 4 (Installers Kit)
»» GigaPOF Installers Kit

FiberFin Finishing Equipment
»» FiberFin 4 (Machine)
»» Faceplates
»» FiberFin 140
»» FiberFin Automation
»» FiberFin HotPlate


Light-Seal® Tools
»» Light-Seal® Swage HAND TOOL 2.2mm
»» Light-Seal® Swage HAND TOOL ST
»» Light-Seal® Swage HAND TOOL SMA


Fiber Optic Test Kit
»» Adapters, Test kit, POF Connectors

 
    FiberFin 4 Diamond finishing advantages
  • Most consistent results with highest quality finish
  • Can finish up to 10,000 connectors per Diamond relapp
  • Fastest finishing time 2 connectors in less than 3 seconds
  • No skilled training
  • Finishes the fiber flat and perpendicular

 

 

How it works:

 
FiberFin 4 is lightweight & portable and is also can be used on a 24v battery power pack.

 

For applications that require the highest connector reliability, we recommend using epoxy it is possible for the fiber to move inside the connector even if the crimp ring is done correctly (fiber poisoning) and this could cause poor performance or a defective connector. FiberFin® recommends using a two-part epoxy #FF4-1656

 

Note: The epoxy must be fully cured before the finishing can be done (typically 24 hours to full cure)

*US Patent 6,361,220

 

 

 

 

 

 

When you have to finish thousand of cable assemblies' call on the experts at FiberFin
Web Design Copyright: Web Design Dr.

Copyright (c) 2006. FiberFin Inc.
All rights reserved.