Products

Products

Video Over POF
»» Luceat

Bulkhead-Couplers
»» Avago
»» MOST
»» MPO
»» SCRJ
»» SC
»» SMA
»» SMI
»» ST
»» Toslink

Connectors
»» Avago
»» SMI
»» ST®
»» SMA
»» Hybrid Connectors
»» TOSLink / PNF07
»» MOST
»» Light-Seal®
»» Custom Made
»» Harsh Enviorment
»» MTP
»» SC
»» SCRJ

Giga POF Connectors
»»» Simplex Connector
»»» Duplex Connectors

Components
»» Crimp Ring
»» Dust Caps
»» Other POF Components
»» Strain Reliefs

POF Related Products
»» Convertes and repeaters
»» Ethernet POF Networks
»» Wallplates
»» TOSlink Related Items
»» Low Cost POF Tools
»» Visible Light Source

Fiber Optic Hand Tools
»» Stripping
»» Crimping
»» Cutting

FiberFin Finishing Tools
»» STD 1 POF Tool
»» STD 2 POF Tool
»» Avago POF Tool
»» SMI Tool
»» TOSLink /F05 Tool
»» MOST Crimp Tool
»» MOST Finishing Tool
»» Replacement Cuting Head

FiberFin Installers Kits
»» FiberFin Basic Installers Kit
»» TOSLink / F05 Installers Kit
»» Avago Installers Kit
»» FiberFin SMI Installers Kit
»» MOST Installers Kit
»» FiberFin 4 (Installers Kit)
»» GigaPOF Installers Kit

FiberFin Finishing Equipment
»» FiberFin 4 (Machine)
»» Faceplates
»» FiberFin 140
»» FiberFin Automation
»» FiberFin HotPlate

Light-Seal® Tools
»» Light-Seal® Swage HAND TOOL 2.2mm
»» Light-Seal® Swage HAND TOOL ST
»» Light-Seal® Swage HAND TOOL SMA

Fiber Optic Test Kit
»» Adapters, Test kit, POF Connectors

Specs:

Locates the ferrule to the proper length (MOST Standard)
Crimps the Brass ferrule with 4 identical indents
Works on the MOST brass ferrules
Very consistent results
Very user friendly

How it works:

This hand tool for crimping the male and female MOST contacts to the POF cable Ø 2.3 mm was designed and manufactured pursuant to state-of-the-art technical requirements that were set up by the MOST cooperation for the automotive industry to have a way to repair and install the male and female MOST contacts to the POF cable.
This is a very simple instruction to receive very repetitive results:

Strip and cut the POF cable (see MOST Finishing Tool Part# FF-MOST-2)
Insert the ferrule into the tools ferrule accommodation, then more the holding tab
Insert the cable into the ferrule and Close the tool *(crimp)
* (The bottom portion of the tool has a polished stop that is setup at the factory that controls the proper crimp length)
Open the crimp tool, release the contact lock and remove the cable with the crimped contact

YOUR DONE! PDF File


MOST Ferrules	MOST Coupler

Click Here for Step-by-Step Instructions

Home About Us Products Services Investors/EmploymentTerms & Conditions Contacts Web Design Copyright: Web Design Dr.	Copyright (c) 2006. FiberFin Inc. All rights reserved.