Products

Products

Video Over POF
»» Luceat

Bulkhead-Couplers
»» Avago
»» MOST
»» MPO
»» SCRJ
»» SC
»» SMA
»» SMI
»» ST
»» Toslink

Giga POF Connectors
»»» Simplex Connector
»»» Duplex Connectors

Fiber Optic Hand Tools
»» Stripping
»» Crimping
»» Cutting

FiberFin Installers Kits
»» FiberFin Basic Installers Kit
»» TOSLink / F05 Installers Kit
»» Avago Installers Kit
»» FiberFin SMI Installers Kit
»» MOST Installers Kit
»» FiberFin 4 (Installers Kit)
»» GigaPOF Installers Kit

Paramerter

Part Number

Symbol

Min.

Typ.*1*

Max.

Units

Temp. C

Adapter connector to Connector Loss	LS-HPLTH-BLKH HFBR4503/4513	acc	.07	1.5	2.5	dB	25
Retention Force Connector to Adapter	LS-HPLTH-BLKH HFBR4503/4513	Frb	10	15	-	N	-

Notes:

No perceivable reduction in retention force was observed after 500 insertions. Latching connections are recommended for applications where high retention force at high tempature is desired.
For application where frequent temperature cycling over temperature extremes is expected, please contact Fiberfin for alternate connectoring techniques.
Minimum and maximum limit for Acc for 0°c to +70°c temperature range. Typical value of Acc is at +25°c.
Fiberfin Termination or field polish per recommended proceedure.
Destructive insertion force was typically at 178 N (40LB)
Typical data are at +25°c

Home About Us Products Services Investors/EmploymentTerms & Conditions Contacts Web Design Copyright: Web Design Dr.	Copyright (c) 2006. FiberFin Inc. All rights reserved.